GE Concord 4 Using a Partitioned, Global Settings, Partition-SpecificSettings, Jumping Partitions

Note

Before allowing any down- load sessions, the system must be disarmed to level 1—OFF.

•Back up data from your system.

•Allow your dealer to quickly implement requested programming changes.

To enable/disable the Panel Download setting:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press 041.

3.To turn Downloading:

on, press 2 + #. The dealer will be able to access your system remotely if necessary. off, press 1 + #. The dealer will not be able to access your system remotely.

4.Press * + 00 + # to exit the programming menus.

Using a

Partitioned

System (Concord 4 systems only)

Concord 4 systems can be set up by your installer to operate as a multiple-partitioned system. Partitioned systems provide security for up to six individual customers or areas of a building from a single control panel. Partitioned systems are useful in strip malls or multi-family housing.

Global Settings

Global system settings affect all partitions. Most are set by the installer. Global settings that are programmed by the user include:

•Time and Date

•System Master code

Partition-Specific Settings

Partition-specific settings affect only one partition. User-programmable, partition-specific set- tings include:

•6 Partition Master codes (1 per partition)

•230 Regular User codes (total for all partitions combined)

•16 time schedules (total for all partitions combined)

•9 Advanced Light Control set-ups available to each partition

•Latchkey feature

•Notify by Exception feature

•Scheduled Arming feature

•Speaker volume settings

•Energy Saver feature and its high and low setpoints.

To program any of these features for another partition, you must enter the User Programming menu from a touchpad in that partition, or jump into that partition, then enter the User Program- ming menu.

Note

If your system uses just one partition, skip this section.

Jumping Partitions

Typically, you would operate Partition 1 from a touchpad within Partition 1. However, if you have access to Partition 3 and want to avoid walking a long distance to a Partition 3 touchpad, you can access Partition 3 from the Partition 1 touchpad by jumping partitions. Depending on how your installer programmed your system, you may or may not have to enter an access code to jump partitions.

The ability to jump to another partition is an attribute you assign to each user code (see “Assign- ing Code Attributes”). Each code has unique partition number assignments that it can control. By default, the System Master is the only code that can jump partitions. Refer to the “Appendix A:

User Sheets” to see if any other access codes have the ability to jump partitions.

28 Concord 4 Series Security Systems