Adjusting the System Status Voice Volume, HourFormat, Midnight

4. Press * + 00 + # to exit the programming menus.

24-HourFormat


00:00	Midnight	08:00 8:00am	16:00 4:00pm
01:00	1:00am	09:00 9:00am	17:00 5:00pm
02:00	2:00am	10:0010:00am	18:00 6:00pm
03:00	3:00am	11:0011:00am	19:00 7:00pm
04:00	4:00am	12:00 Noon	20:00 8:00pm
05:00	5:00am	13:00 1:00pm	21:00 9:00pm
06:00	6:00am	14:00 2:00pm	22:0010:00pm
07:00	7:00am	15:00 3:00pm	23:5911:59pm
		Figure 4. 24-Hour Format

To set the System Date:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press 021.

3.Enter the current date as 6 digits (mm/dd/yy) then press #. For example, if the current date is January 15, 2000, press 011500 + #.

4.Press * + 00 + # to exit the programming menus.

Adjusting

System Sounds

and Touchpad

Brightness

Adjusting the Touchpad Beeps (Fixed Display Touchpad Only)

The frequency or pitch of chime and trouble beeps from each fixed display touchpad can be adjusted individually to a more desirable or distinct tone.

Chime and trouble beep tones sound using the default frequency during, or within 15 seconds of any button activity at that specific touchpad.

To change status tone pitch:

1.Press and hold * + 0 until you hear a steady tone, then release the buttons.

2.Press and hold 1 to lower the pitch or press and hold 2 to raise the pitch.

3.Release the button when the desired pitch is heard.

After about 15 seconds of no touchpad activity, the steady tone stops sounding.