GE Concord 4 manual Press

Temperature settings can range from 45° to 90° Fahrenheit.

High

Setpoint

90°

Ifroomtemperature reacheshighsetpoint, airconditionerturnson.

Ifroomtemperature reacheslowsetpoint, furnaceturnson.

Low

Setpoint

45°

Note

Disarming the system turns off the Energy Saver.

Figure 5.Energy Saver Setpoints

To set the Energy Saver temperature range from a touchpad:

1.Enter the programming menus by pressing 9 + System or Partition Master CODE.

2.Press 070.

3.Enter the lowest temperature (45–89°F) you’ll allow before the furnace turns on, and press #.

4.Press B. Enter the highest temperature (46–90°F) you’ll allow before the air conditioner turns on, then press #.

5.Press * + 00 + # to exit the programming menus.

To override your normal heating or air conditioning settings, turn the Energy Saver feature on. When you are ready to return to your normal temperature control settings, turn Energy Saver off.

To turn Energy Saver on/off from any touchpad:

1. Press 7 + 2. Alphanumeric touchpads display, “ENERGY SAVER IS ON,” for example.

Notification by Your system can notify up to five different pager phone numbers to report system events. The

Pagerinstaller can program any numeric pager to receive pages for one or more of the following groups.

High Level Reports		Low Level Reports
Sensor Alarms	Freeze Alarms	Bypass Sensors	AC Power Failure
Tamper	Freeze Troubles	Low Battery	CPU Low Battery
Restorals	No Activity Alarm	Supervisory	Auto Phone Test
Phone Tests	Fire Panic	Trouble	CPU Back in Service
Receiver Failure	Police Panic	Phone Test	Phone Failure
Receiver Jam	Auxiliary Panic	Event Buffer Full	Touchpad Low Battery
Touchpad Tamper
Bus Failures

• Opening and Closing Reports

• Latchkey Reports

• Notify by Exception Reports

18 Concord 4 Series Security Systems