Using FPC 1000 with a Notebook PC
2.1.3.2Attaching the Extended Range Antenna
The extended range antenna cable greatly improves signal strength and quality. It increases the operating range of the PC, and enhances connectivity and throughput.
To install the extended range antenna, follow the instructions in Figure 5:
1.Place the foam tape bracket retainer on the back of the laptop screen. Make sure that the open edge is facing upwards.
2. Insert the connector end of the cable into the antenna bracket. The connector should snap into place.
3. Slide the antenna bracket into the foam tape bracket retainer.
4. Mount the antenna into the antenna bracket. Make sure the antenna is pointing up.
5. Connect the other end of the cable into the wireless network card, which should be inserted into the PCMCIA slot.
Figure 5: Installing the Extended Range Antenna Kit
2004 Flarion | Version 1.0 |
Flarion Proprietary and Confidential | Page 13 |
