GE FVR-C9S-7UX In-Warranty Failure Checklist, Latest Fault Previous Faults No Message

FVR-C9S-7UX

In-Warranty Failure Checklist

To assist with warranty troubleshooting, the following information is required. This data is needed to evaluate the cause in an effort to eliminate any further failures.

Model No.:
Serial No.:
Start-Up Date:
Failure Date:
Status When Failure Occurred (check one):
Power-Up			Running		Accel			Decel
Explanation of Failure:
Application Information (check Yes or No)
Input Transformer:					Yes			No
	If Yes:	KVA
		L1 Volts		L2 Volts			L3 Volts
Power Factor Correction Capacitors:					Yes			No
	If Yes:	Microfarad
Other Equipment on Same Power							Yes		No
	If Yes, what?
Line Reactor on Input							Yes		No
Input Starter							Yes		No
Output Starter							Yes		No
Motor Overloads							Yes		No
Control Terminals Used (circle if used)
THR	X1	X2	X3	30A	30B		30C
RST/BX	FWD	REV	C1	11	12	13
RUN	RT1

Function Codes Different From Factory Settings
Function Code	Setting	Function Code

Setting

Failure Message (see Section 5)
Latest Fault	Previous Faults:	No Message
Hz	1.
A	2.
V	3.

After all of the Checklist information is acquired, contact the following Service Center number for assistance:

540-387-5739 (8am - 5pm Central Standard time Monday thru Friday). 540-387-8292 (24-hour emergency)

When you return the unit for warranty you need to get a RMA number from your Service Center.

36