CONNECTIONS

DVD Player + TV without A/V Input Jacks

(Good Picture and Sound Quality)

TV

ANT IN

RF MODULATOR

DVD

PLAYER

Video

RF Out

 

Audio (L)

Ant In

 

R

L

AUDIO VIDEO

CABLE

OR

OFF-AIR SIGNAL

To Connect the DVD Player

If you do not have audio/video input jacks on your television, you need to use an RF modulator, and a splitter.

1.Connect one end of the A/V cables to the Left Audio and the Video outputs on the DVD player.

2.Connect the other end to the corresponding inputs on the RF modulator.

3.Connect the off-air antenna or your cable signal to the antenna input on the RF modulator (if it has one).

4.Connect the output from the modulator to the antenna input on your television.

CAUTION

Do not stack electronic components or other objects on top of the DVD player. See Safety Information, inside front cover.

To Watch DVD

Tune your television to RF modulator output channel (the modulator should have a CH 3/4 switch to indicate the output channel).

NOTE:

You may need to adjust the A/B switch on the RF modulator to watch television programming.

Consult the owner’s manuals of the additional components you are connecting for more detailed connection information for those particular components.

10

Page 12
Image 12
GE GE1100P manual DVD Player + TV without A/V Input Jacks, To Connect the DVD Player, To Watch DVD