Adjusting the water temperature and function mode.

This water heater defaults to the Hybrid operating mode. The Hybrid mode is the recommended setting for this water heater, but can be changed if desired. Available modes are listed below and can be found under the ENERGY MENU button.

eHeat™ Mode

eHeat™ is the most energy-efficient mode for this water heater. It takes heat from the surrounding air to heat the water. The time it takes to heat the water is longer in this mode, so it may NOT be sufficient if you have a high-demand situation such as a large household or company.

Standard Electric Mode

This mode uses only the upper and lower heating resistance elements to heat the water. The time it takes to heat the water is less in this mode, but it is the LEAST energy-efficient mode.

Hybrid Mode—RECOMMENDED MODE

Hybrid mode combines the energy efficiency of eHeat™ with the recovery speed and power of the Standard Electric mode, with normal water usage.

To access any of these modes:

1Press the ENERGY MENU button and then press ENTER.

2Select “Operating Modes” on the menu list and press ENTER.

3Select the desired operating mode by using the UP and DOWN arrow buttons and then press ENTER again.

To cancel and return to the main energy menu:

Press the LEFT arrow button.

General navigation of energy menu:

1For more information on each mode, while the mode is highlighted, press the RIGHT arrow button to read a description.

2Use the UP and DOWN arrow buttons to scroll through the description screens.

3Use the LEFT arrow button to return to the “Operating Modes” menu list.

Safety

Instructions

Operating

Instructions

Care and

Cleaning

 

 

Installation

Instructions

 

 

Troubleshooting

Tips

 

 

Consumer

Support

High Demand

This mode is only necessary if your household

has a higher-than-average water usage or the unit is undersized for the household water demands.

In this mode, the unit will use the electric heating elements only when the water demand is higher than normal. When using the heating elements, the water temperature will recover at a faster rate but it will take more energy to heat it. Unlike Standard Electric mode, it will use the heating elements only when needed.

8