GE GEK-106465A Control Settings for INPUTS/OUTPUTS, INPUT/OUTPUT Boards Settings

I/O MODULES DESCRIPTION

5.2.CONTROL SETTINGS FOR INPUTS/OUTPUTS

This section explains the settings related to CIO inputs/outputs. Modification of these values is performed using the master unit communication software, EnerVista F650Setup for F650, or GE-CONF for F600.

5.2.1. INPUT/OUTPUT BOARDS SETTINGS

Settings relative to I/O boards are described in table 5-1:

TABLE 5-1 I/O BOARD SETTINGS

SETTING		HMI	DEFAULT
I/O board type (available only for		I/O Board_X Type	NONE
CIO modules)
Input activation voltage threshold		Voltage Threshold A_X	80
Group A
Input activation voltage threshold		Voltage Threshold B_X	80
Group B
Debounce time Group A	Debounce Time A_X		15
Debounce time Group B	Debounce Time B_X		15
Input type		Input Type_X_CCY	POSITIVE
Input signal time delay		Delay Input	0
		Time_X_CCY
Output logic type	Output Logic_X_0Z		POSITIVE
Output type		Output Type_X_0Z	NORMAL
Output pulse length		Pulse Output	0
		Time_X_0Z

RANGE

16 INP + 8OUT

8 INP + 8OUT +

SUPV

NONE

0 – 255 V

0 – 255 V

1 – 50 ms

1 – 50 ms

POSITIVE-EDGE NEGATIVE-EDGE POSITIVE NEGATIVE

0 – 60000 ms

POSITIVE-

NEGATIVE

NORMAL

PULSE

LATCH

0 – 60000 ms

STEP

N/A

1 V

1 V

1ms

1ms

N/A

1ms N/A

N/A

1 ms

Being:

XI/O board name, depending on the CIO model.

For the I/O board selection in the relay model, associated digits to each board type are as follows:

ASSOCIATED DIGIT	F650PC BOARD	BOARD TYPE
	SETTINGS
0	NONE	None
1	16 INP+ 8OUT	Mixed
2	8 INP +8 OUT +SUPV	Supervision

32 CIO Remote CAN Digital I/O Module GEK-106465A