GE HC HP Appendix B: PPP/SLIP Driver Installation

GE MDS Intrep id-HC HP Installation Gu ide B-1
Appendix B: PPP/SLIP Driver Installation
Installation for Windows 2000/2003/XP
1. Click Start, Settings, Network and Dialup, Make New Connection.
2. Click Next.
3. Mark Connect direc tly to another computer.
4. Click Next.
5. Mark Guest.
6. Click Next.
7. Select Communication cable b etween two computers.
8. Click Next.
9. Select For all users.
10. Click Next.
11. Type The connection Name.
12. Click Finish.
Configuring PPP
1. Click Start, Settings, Network and Dialup.
2. Select The connection Name.
3. In the General tab click Confi gure, and set the speed to 38400.
4. Check Enable Har dware flow control.
5. Uncheck Modem E rror control, Modem Compression.
6. Select Network tab.
7. Select Type PPP.
8. Select I nte rnet protocol (TCP/IP) and click Properties.
9. Uncheck all options except TCP/IP.
10. Check Use the following IP.
11. Insert IP Address (the same subnet as the Indoor Unit).
12. Click OK.
13. Click OK.