GE JBP26WR, JBP26GR, JBP25GR Installation Instructions, Before You Begin, Tools You Will Need

Models: JBP26WR JBP28GR JBP27GR JBP22GR JBP24GR JBP22R JBP26AR JBP25GR JBP26GR

1 32
Download 32 pages 32.23 Kb
Page 26
Image 26
INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN

Read these instructions completely and carefilly.

IMPORTANT: Save these instructions for the local electrical inspector’s use.

IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.

NOTE TO INSTALLER: Leave these instructions with the appliance after installation is completed.

NOTE TO CONSUMER: Keep this Use and Care Guide and Installation Instructions for future use.

NUIT3: This appliance must be properly grounded.

TOOLS YOU WILL NEED

Large blade screwdriver

STEP 1

PREWRE THE OPENING

1%” spacing is recommended from the range to adjacent vertical walls above cooktop surface.

Allow 30” minimum clearance between surface units and bottom of unprotected wood or metal top cabinet, and 15” minimum between countertop and adjacent cabinet bottom.

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a min. of 5“ beyond the bottom of the cabinets.

NOT LESS THAN

WIDTH OF RANGE

i,

/

 

Channel lock pliers or small ratchet wrench with 3/16” socket (for leveling range)

ELECTRICAL REQUIREMENTS

CAUTION, FOR PERSONAL SAF131Y:

DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

REMOVE HOUSE FUSE OR OPEN CIRCUIT BREAKER BEFORE BEGINNING INSTALLATION.

This appliance must be supplied with the proper voltage and tiequency, and connected to an

Iu30” -

MIN. 15J

MIN.

//

0

I

I

I

\

 

 

 

 

 

Y MIN.

LOCATE

I OUTLET BOX WITHIN EITHER SHADED AREA

individual, properly grounded branch circuit, protected by a circuit breaker or time delay fuse, as noted on the rating plate.

Wiring must conform to National Electric Codes.

Lf the electric service provided does not meet the above specifications, it is recommended that a licensed electrician install an approved outlet.

Because range terminals are not accessible after range is in position, flexible service conduit or cord must be used.

INSTALL

OUTLET BOXJ ON EITHER

SIDE OF Q

I

26

..———. .———

 

———.——

 

-—

 

 

Page 26
Image 26
GE JBP26WR, JBP26GR, JBP25GR Installation Instructions, Before You Begin, Tools You Will Need, Step Prewre The Opening