GE JBP80 warranty Convection Roasting, CO NV Roast

CONVECTION ROASTING

(continued)

How to Set Your Oven for Convection Roasting When Using the Temperature Probe

NOTE: For best results when roasting large turkeys and roasts, we recommend using the probe included in the convection oven. For the correct placement of the probe, see the description in the Regular Roasting section.

Do not lock the oven door with the latch during convection roasting. The latch is used for self- cleaning only.

The display will flash “PROBE” and the

oven control will signal if the probe is inserted into the outlet, but the oven is not programmed for the probe.

oven door.

3.Press the PROBE pad.

lpROBEl

m		4. Press the INCREASE or
		DECREASE pad until the
		desired internal probe
		temperature is displayed.
	5. Press the CONV. ROAST pad.
(

CO NV.

ROAST

When the oven starts to heat, the words “CONV ON” and the roasting temperature you set will be in the display.

After a few seconds, the words “LO PROBE” will replace the roasting temperature in the display. After the internal temperature of the meat reaches 100°F., the changing internal temperature will be shown in the display.

7. When internal temperature of meat o reaches the number you have set, the

CLEAR

probe and the oven turn off and the

OFF oven control signals. To stop the signal, press the CLEAR/OFF pad. Use hot pads to remove the probe from the food. Do not use tongs to pull on it—they might damage it.

CAUTION: To prevent possible burns, do not unplug the probe from the oven outlet until the oven has cooled. Do not store the probe in the oven.

NOTE:

●If the probe is removed from the food before the final temperature is reached, a tone will sound and the display will flash until the probe is removed from the oven.

●You will hear a fan while cooking with this feature. The fan will stop when the door is opened but the heat will not turn off.

. You can use the timer even though you cannot use timed oven operations.

To change the oven temperature during the Convection Roast cycle, press the CONV. ROAST pad and then press the INCREASE or DECREASE pad to get the new desired temperature.

+	(7	6. Press the INCREASE or
		DECREASE pad.
		The last oven set
		temperature appears in the
A v		display. Continue pressing

unt-il the desired oven temperature is displayed.

\