Instructions |
|
Using the clock, timer and convenience outlet.
Safety |
To Reset the Timer
If the display is still showing the time remaining, you may change it by touching the TIMER pad, then touch the + or – pads until the time you want appears in the display.
If the remaining time is not in the display (clock, delay start or cooking time are in the display), recall the remaining time by touching the TIMER pad and then touching the + or – pads to enter the new time you want.
Operating | Instructions |
Cleaning | |
To Cancel the Timer
Touch the TIMER pad twice.
Power Outage
If a flashing time is in the display, you have | To reset the clock, touch the CLOCK pad |
experienced a power failure. Reset the clock. | twice. Enter the correct time of day by |
| touching the + or – pads. Touch the |
| START/ON pad. |
Care and |
Installation Instructions |
Troubleshooting Tips |
Convenience Outlet
The 120V convenience outlet located on the top of the backguard may be used to plug in small electrical appliances.
When using the outlet, be sure that the electrical cord does not rest on or near a surface unit. If the surface unit is turned on, the cord will be damaged.
To reset the circuit breaker, press the switch located near the outlet on top of the backguard.
Consumer Support
8
