GE JGBP90, JGBP79, JGBP85, JGBP35 manual Using the oven controls, Safety Instructions Operating

Using the oven controls.

Throughout this manual, features and appearance may vary from your model.

(on models with INCREASE [+] and DECREASE [–] pads only)

Oven Control, Clock and Timer Features and Settings

Safety Instructions Operating

BAKE Pad

Press this pad to select the bake function.

BROIL HI/LO Pad

Press this pad to select the broil function.

Function Indicators

Light up to show whether the oven is in the bake, broil or self-clean mode.

Oven Temperature and Broil Display

Shows the oven temperature or the broil setting selected.

Time Display

Shows the time of day, the times set for the timer or automatic oven operation.

Program Status

Words light up in the display to indicate what is in the time display. Programmed information can be displayed at any time by touching the pad of the operation you want to see. For example, you can display the current time of day while the timer is counting down by pressing the CLOCK pad.

If “F—and a number or letter” flash in the display and the oven control signals, this indicates a function error code.

On models with an oven door latch, if the function error code appears during the self-cleaning cycle, check the oven door latch. The latch handle may have been moved, even if only slightly, from the latched position. Make sure the latch is moved to the right as far as it will go.

Press the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the range and call for service.

If a flashing time of day is in the display, you have experienced a power failure. Reset the clock.

If your oven was set for a timed oven operation when the power outage occurred, the clock and all programmed functions must be reset.

COOKING TIME Pad

Press this pad and then press the INCREASE or DECREASE pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

START TIME Pad

Use along with the COOKING TIME or SELF CLEAN pad to set the oven to start and stop automatically at a time you set.

CLOCK Pad

Press this pad before setting the clock. The time of day will flash in the display when the oven is first turned on.

KITCHEN TIMER ON/OFF Pad

Press this pad to select the timer feature.

START Pad

Must be pressed to start any cooking or cleaning function.

DECREASE Pad

Short taps to this pad will decrease the time or temperature by small amounts. Press and hold the pad to decrease the time or temperature by larger amounts.

INCREASE Pad

Short taps to this pad will increase the time or temperature by small amounts. Press and hold the pad to increase the time or temperature by larger amounts

CLEAR/OFF Pad

Press this pad to cancel ALL oven operations except the clock and timer.

SELF CLEAN Pad

Press this pad to select the self-cleaning function. See the Using the self-cleaning oven section.

11

Instructions Installation Instructions Troubleshooting Tips Customer Service