GE JGBP90, JGBP79, JGBP85, JGBP35 manual Adjust the oven thermostat-Do it yourself

Adjust the oven thermostat—Do it yourself!

You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat yourself.

Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven. These thermometers may vary 20–40°F.

	To Adjust the Thermostat (on models with number pads only)
+	Press the BAKE and BROIL HI/LO pads at
	the same time for 2 seconds until the
	display shows SF.

Press the BAKE pad. A two digit number shows in the display. Press the BAKE pad once to increase (+) the oven temperature, or twice to decrease (–).

The oven temperature can be adjusted up to (+) 35°F. hotter or (–) 35°F. cooler. Press the number pads the same way you read them. For example, to change the oven temperature 15°F., press 1 and 5.

When you have made the adjustment, press the START pad to go back to the time of day display. Use your oven as you would normally.

NOTE: This adjustment will not affect the broiling or self-cleaning temperatures. It will be retained in memory after a power failure.

	To Adjust the Thermostat (on models with + or – pads only)
+	Press the BAKE and BROIL HI/LO pads at
	the same time for 2 seconds until the
	display shows SF.

Press the BAKE pad. A two digit number shows in the display.

The oven temperature can be adjusted up to (+) 35°F. hotter or (–) 35°F. cooler. Press the + pad to increase the temperature in 1 degree increments.

Press the – pad to decrease the temperature in 1 degree increments.

When you have made the adjustment, press the START pad to go back to the time of day display. Use your oven as you would normally.

NOTE: This adjustment will not affect the broiling or self-cleaning temperatures. It will be retained in memory after a power failure.

21

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Customer Service