Special features of your oven control. | www.GEAppliances.com |
Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after a power failure.
Safety Instructions
12 Hour Shut-Off
With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function.
If you wish to turn OFF this feature, follow the steps below.
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the DELAY START pad. The display will show 12 shdn (12 hour
Touch the START pad to activate the no
Operating Instructions
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit temperature selections, but you may change this to use the Celsius selections.
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the BROIL HI/LO and COOKING TIME pads at the same time. The display will show F (Fahrenheit).
Touch the BROIL HI/LO and COOKING TIME pads again at the same time. The display will show C (Celsius).
Touch the START pad.
Installation Instructions
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continual
To cancel the
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the BROIL HI/LO pad. The display shows CON BEEP (continual beep) and BEEP. Touch the BROIL HI/LO pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)
Touch the START pad.
Troubleshooting Tips
Changing the Speed of the Increase or Decrease Pads
As you use the INCREASE or DECREASE pads when setting a time or temperature, you may notice the display changes slowly. This special feature allows you to change the speed.
To set the speed you prefer, follow the steps below.
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the + pad. The display will show you a set speed between 1 and 5.
Touch the + pad to increase the speed up to the number 5.
Touch the – pad to decrease the speed down to the number 1.
Touch START to activate the setting and leave the control set in this special features mode.
17
Consumer Support