GE JGBP83, JGBP99 Installation Instructions Operating Instructions Safety, After a Clean Cycle

Models: JGBP83 JGBP36 JGBP99

1 56
Download 56 pages 9.46 Kb
Page 26
Image 26
How to Delay the Start of Cleaning

Instructions

Using the self-cleaning oven.

The oven door must be closed and all controls set correctly for the cycle to work properly.

How to Delay the Start of Cleaning

Installation Instructions Operating Instructions Safety

Make sure the clock shows the correct time of day.

If your model has a latch, latch the door.

Touch the SELF CLEAN pad.

Using the + or or the number pads, enter the desired clean time.

Touch the DELAY START pad. The earliest start time you can set will appear in the display.

Using the + or or the number pads, enter the time of day you want the clean cycle to start.

Touch the START pad.

On models without a door latch, the door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.

The oven shuts off automatically when the clean cycle is complete.

When the LOCKED DOOR light is off, slide the latch handle to the left as far as it will go and open the door. If your range does not have a latch, the door will unlock automatically.

The words LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door or forget to latch the door on models with a latch.

To stop a clean cycle, touch the

CLEAR/OFF pad. When the LOCKED DOOR light goes off indicating the oven has cooled below the locking temperature, unlatch the door (on models with a latch) and open the door.

Consumer Support Troubleshooting Tips

After a Clean Cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap- filled scouring pad and rinse thoroughly with

a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

You cannot set the oven for cooking until the oven is cool enough for the door

to unlock.

While the oven is self-cleaning, you can touch the TIMER/CLOCK pad to display the time of day. To return to the clean countdown, touch the COOKING TIME pad.

If the shelves become hard to slide, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.

26

Page 26
Image 26
GE JGBP83 Installation Instructions Operating Instructions Safety, How to Delay the Start of Cleaning, After a Clean Cycle