.emovable Oven Door

The oven door is removable,

but it is heavy. You may need help removing and replacing the door.

Do not lift the door by the handle. This could cause the glass to break or cause damage to the door.

To remove the door, open it a few inches to the special stop position that will hold the door open. Grasp firmly on each side and lift the door straight up and off the hinges.

NOTE: Be careful not to place hands between the hinge and the oven door frame as the hinge could snap back and pinch fingers.

To replace the door, make sure the hinges are in the special stop position. Position the slots in the bottom of the door squarely over the hinges. Then lower the door slowly and evenly over both hinges at the same time. If hinges snap back against the oven frame, pull them back out.

TO CLEAN THE DOOR:

Inside of door:

~êÜ‹ Because the area inside the gasket is cleaned during the self clean cycle, you do not need to clean this by hand. Any soap left on the liner causes additional stains when the oven is heated.

●The area outside the gasket can be cleaned with a scouring pad.

●Do not rub or clean the door gasket—the fiberglass material of the gasket has an extremely low resistance to abrasion. An intact and well-fitting oven door gasket is essential for energy-efficient oven operation and good baking results. If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

NOTE: The gasket is designed with a gap at the bottom to allow for proper air circulation.

Inside / Gasket Outside

GasketGasket

Outside of door:

●Use soap and water to thoroughly clean the top, sides and front of the oven door. Do not let water run down through openings in the top of the door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door.

●Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

●Do not use oven cleaners, cleansing powders or harsh abrasives on the outside of the door.

NOTE: Do not clean the bake unit or the broil unit. Any soil will burn off when the units are heated. The bake unit can be lifted gently to clean the oven floor. If spillover, residue, or ash accumulate around the bake unit, gently wipe around the unit with warm water.

Oven Shelves

Clean the shelves with a mild abrasive cleanser. After cleaning, rinse the shelves with clean water and dry with a clean cloth.

The oven shelves may be cleaned in the self- cleaning oven. However, they will darken, lose their luster and become hard to slide. Wipe the shelf supports with cooking oil after self-cleaning to make shelves slide more easily.

To remove heavy, burned on soil, soapy metal pads may be used. After scrubbing, wash with soapy water, rinse and dry.

(continued next page)

29

Page 28 Page 30
Page 29
Image 29
GE JSP39GR, JSP40AS, JSP38GS, JSP38GP warranty Emovable Oven Door, Inside of door, Outside of door
Page 28 Page 30

JSP38GP, JSP38GS, JSP39GR, JSP40AS specifications

The GE JSP40AS, JSP39GR, JSP38GS, and JSP38GP are high-efficiency gas and electric water heaters designed to meet a variety of residential and commercial hot water needs. These models stand out due to their advanced technologies, energy-saving features, and innovative designs that prioritize user convenience and performance.

The JSP40AS model is a flagship in the lineup, featuring a 40-gallon tank capacity ideal for medium to large households. Its Energy Factor (EF) rating is impressive, indicating low energy consumption relative to the output. This model incorporates a durable stainless-steel burner, which is designed to provide consistent heating while minimizing energy usage. Additionally, the JSP40AS is equipped with a self-cleaning feature that helps reduce sediment buildup in the tank, enhancing longevity and efficiency.

Meanwhile, the JSP39GR model is geared toward efficiency without compromising performance. This unit employs advanced insulation technology to minimize heat loss, allowing hot water to be stored at optimal temperatures for longer periods. It also features an electronic ignition system that ensures reliable starts while using less gas compared to traditional pilot light systems. This model is well-suited for families seeking a balance between energy savings and hot water availability.

The JSP38GS offers a compact design, making it an excellent choice for homes with limited space. Despite its smaller size, it retains a high capacity and is built with advanced safety features, including a temperature and pressure relief valve. Its intelligent design also includes user-friendly controls, enabling homeowners to manage water temperature settings easily.

Lastly, the JSP38GP is specifically tailored for those looking for an eco-friendly hot water solution. This model not only meets strict energy efficiency standards but also comes with a high-performance heating element that optimizes energy use. Its digital display provides real-time feedback on performance, helping users monitor energy savings and operational efficiency.

In summary, the GE JSP series, including models JSP40AS, JSP39GR, JSP38GS, and JSP38GP, showcases a commitment to quality and efficiency. With features like advanced insulation, self-cleaning capabilities, and user-friendly controls, these water heaters are designed to meet modern households' diverse hot water demands while promoting sustainability and energy conservation. Whether for a large family or a compact space, GE offers reliable solutions tailored to meet various customer needs.
Top Page Image Contents