GE JSP38GP, JSP40AS, JSP39GR, JSP38GS warranty Installing, Leveling

Models: JSP38GP JSP38GS JSP39GR JSP40AS

1 36
Download 36 pages 13.41 Kb
Page 7
Image 7
Installing

Installing

Your range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. When moving the range on this type of flooring, use care, and it is recommended that these simple and inexpensive instructions be followed.

The range should be installed on a l/4-inch thick sheet of plywood (or similar material) as follows: When thefloor covering ends at the front of the range, the area the range will rest on should be built up with plywood to the same level or higher than the floor covering. This will allow the range to be moved for cleaning or servicing. See the complete installation instruction booklet included with the range for full details.

Leveling

Use a 1X+” open end or adjustable wrench to equally back out the 4 legs. The flanges (rims) below the sides of the cooktop must be raised above the top of the countertop. Carefully slide the range into its installation space. Observe that it is clearing the countertop. Then place a spirit level or a glass measuring cup partially filled with water on 1 of the oven shelves to check for levelness. If using a spirit level, take 2 readings, with the level placed diagonally first in 1 direction and then the other.

Adjust the 4 legs carefully. Level the range front to back and side to

side. The range legs must rest on the floor. The range must not hang from the countertop.

7

Page 7
Image 7
GE JSP38GP, JSP40AS, JSP39GR, JSP38GS warranty Installing, Leveling