Troubleshooting
Problem | Probable Cause | |
|
|
|
*Unable to verify | 1. | No power. |
capture of text. |
|
|
| 2. | Incorrect cabling. |
| 3. | Incorrect switch |
|
| settings. |
Garbled text. | Incorrect baud rate |
27
Solution
1.Check power.
2.Check cables.
3.Verify settings with Display Memory mode on page 18.
Check baud rate for POS device, set DIP switches to match.
* Use Demo mode to verify that the PB3 is passing data to the DVMRe.
