GE PFSS6SMXSS Support, Troubleshooting Tips Consumer, Default, Instructions, Installation

ge.com

Safety

	METRIC
	Button
SYSTEM		BACK
	TIME
DOOR ALARM	(SET TIME)
	UNITS
BUTTON TONES	ENGLISH	METRIC
ENERGY SAVER	ICE MAKER
COOLING SYSTEM
DISPENSER WATER		HOME
	ICEMAKER
	Button

12:00 PM					WATER FILTER: GOOD
				EXTRAS
FREEZER		FRESH FOOD
						CONVERSIONS
-18	C	3	C
						NUTRITION FACTS
						PHOTOS
LOCK		SETTINGS
						SUBSTITUTIONS
HOLD 3 SECONDS

DISPENSER WATER

SETTINGS (cont.)

UNITS

To change the temperature readings from English units to Metric units, press the METRIC button. Units shown on the HOME screen will now read in Celsius instead of Fahrenheit.

ICEMAKER

The icemaker will produce seven cubes per cycle—approximately 100–130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions. If the refrigerator is operated before the water connection is made to the icemaker, press and release the ICEMAKER button on the SYSTEM screen to disengage the icemaker. When the refrigerator has been connected to the water supply, press and release the ICEMAKER button on the SYSTEM screen to engage the icemaker. A newly installed refrigerator may take 12 to 24 hours to begin making ice cubes and

the ICEMAKER default is ON (check).

You will hear a buzzing sound each time the icemaker fills with water. Throw away the first few batches of ice to allow the water line to clear. It is normal for several cubes to be joined together. If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink. NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice. NOTE: Turn OFF the icemaker if the water supply is shut off.

Instructions Operating Instructions

SETTINGS	BACK
	REFRIGERATOR

WATER FILTER

SYSTEM

SCREEN

DISPENSER WATER HOME

SCREEN

Button

SCREEN		BACK
SCREEN SAVER
	DEFAULT	ENTER
BRIGHTNESS
DISPENSER	WATER	HOME

SCREEN

Select the SCREEN button from the SETTINGS screen to adjust the BRIGHTNESS of the display and to choose a SCREEN SAVER.

For BRIGHTNESS, use the LEFT and RIGHT arrow keys to dim and brighten the screen.

For SCREEN SAVER, use the UP and DOWN arrow keys to choose DEFAULT, SLIDE SHOW, BACKGROUND or OFF.

DEFAULT gives a slide show of factory pre-loaded pictures at 10-second intervals. These pictures are not viewable in the PHOTOS screen and remain even when all photos are deleted.

SLIDE SHOW takes the most recently selected photo among user-uploaded pictures and displays this one first, then the remaining random photos at 10-second intervals for 15 minutes.

BACKGROUND takes the most recently selected photo among user-uploaded pictures and displays this as a static image. After 15 minutes of displaying this screen with no activity, the backlight will go OFF.

OFF sets no BACKGROUND, SCREEN SAVER or SLIDE SHOW.

Instructions Installation

Troubleshooting Tips Consumer

Set Screen Saver and/or	Set Brightness
Background	of Screen

11

Support