Instructions
About the control with temperature settings for non-LCD models.
Instructions Safety
ENERGY | TURBO FREEZE | TURBO COOL | ||
SAVER | ||||
|
| |||
|
|
| CLIMATE KEEPER | |
|
|
| ||
ADJUST |
|
| ||
FREEZER |
| ˚F | ˚F | |
(Hold 3 sec | 38˚ F Recommended | |||
for Turbo Freeze) |
|
| ||
|
|
| ICE | |
|
|
| OFF | |
ICE & |
|
|
| |
WATER |
| RESET FILTER CUBED | CRUSHED WATER | |
(Hold 3 sec
to Reset Filter)
ALARM/
LIGHT
Light ON/OFF
(Hold 3 seconds)
ADJUST
REFRIGERATOR
(Hold 3 sec
for Turbo Cool)
ICE OFF/
LOCK
(Hold 3 sec
to Lock Control)
Operating
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.
The temperature controls are preset in the factory at 38°F for the refrigerator compartment and
the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.
Installation | Instructions |
Consumer Support Troubleshooting Tips
ADJUST
REFRIGERATOR
(Hold 3 sec
for Turbo Cool)
ADJUST
FREEZER
(Hold 3 sec
for Turbo Freeze)
Changing the Temperature
To change the temperature, press and release the ADJUST FREEZER or ADJUST REFRIGERATOR pad. The display will show the actual temperature. To change the temperature, tap either the ADJUST FREEZER or ADJUST REFRIGERATOR pad until the desired temperature is displayed.
Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 10 seconds. Several adjustments may be required.
Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.
12
