GE PFSS6SMXSS operating instructions Installation Instructions INSTALLING THE REFRIGERATOR cont

Installation Instructions

INSTALLING THE REFRIGERATOR (cont.)

5REMOVE THE REFRIGERATOR DOORS

AOpen the refrigerator doors.

BRemove the two caps with a flat-head screwdriver.

CRemove the three screws on top with a Phillips-head screwdriver.

DDisengage the two electrical connectors.

ETo disconnect the water coupling, push in on the gray color of the coupling and pull out the tubing.

FRemove the two grounding cables with a Phillips-head screwdriver.

GRemove three 10 mm hex-head bolts (right and left).

CAUTION: When the bolts are removed, the door may fall and cause personal injury and/or damage to the door itself.

5REMOVE THE REFRIGERATOR DOORS (cont.)

HLift the door straight up to remove.

IRemove the two hex-head bolts and two Phillips-head screws from the center hinge. Set the hinge, bolts and screw aside.

6REPLACING THE REFRIGERATOR DOORS

AInstall the center hinge on each side.

BLower the refrigerator door onto the center hinge pin. Ensure that the plastic hinge pin thimble is on the center hinge pin or inside door hinge pin hole located

in the bottom of the door.

CSecurely tape the door shut with masking tape or have a second person support the door.

28