GE PFSS6SMXSS Turn On The Water Supply, Plug In The Refrigerator, Replace The Freezer Bin

Models: PFSS6SMXSS

1 140
Download 140 pages 52.43 Kb
Page 31
Image 31
REPLACE THE FREEZER BIN

Installation Instructions

8REPLACING THE FREEZER DOOR (cont.)

REPLACE THE FREEZER BIN

Hook the ends of the freezer bin into both brackets, and push down until they lock into place. (See page 19.)

9CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE

A cold water supply is required for automatic icemaker operation. If there is not a cold water supply, you will need to provide one. See Installing the Water Line section.

NOTES:

Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

If your refrigerator does not have a water filter, we recommend installing one if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator. If using GE SmartConnectRefrigerator Tubing Kit, you will need an additional tube (WX08X10002) to connect the filter. Do not cut plastic tube to install filter.

AIf you are using copper tubing, place a compression nut and ferrule (sleeve) onto the end of the tubing coming from the house cold water supply.

If you are using the GE SmartConnecttubing, the nuts are already assembled to the tubing.

9CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE (cont.)

BIf you are using copper tubing, insert the end of the tubing into the refrigerator connection, at the back of the refrigerator, as far as possible. While holding the tubing, tighten the fitting.

If you are using GE SmartConnecttubing, insert the molded end of the tubing into the refrigerator connection, at the back of the refrigerator, and tighten the compression nut until it is hand tight. Then tighten one additional turn with a wrench. Overtightening may cause leaks.

CFasten the tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

Ferrule

1/4

(sleeve)

Compression

 

Nut

Refrigerator

Connection 9CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE

SmartConnect

Tubing

10TURN ON THE WATER SUPPLY

Turn the water on at the shutoff valve (house water supply) and check for any leaks.

11PLUG IN THE REFRIGERATOR

See the grounding information attached to the power cord.

31

Page 31
Image 31
GE PFSS6SMXSS Turn On The Water Supply, Plug In The Refrigerator, Replace The Freezer Bin, Installation Instructions