Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
7REMOVE THE FREEZER DOOR (cont.)
EUse the tip of a screwdriver to separate the rail from the rail cover. Tilt the front end up and lift the entire door.
FSet the door front on a nonscratching surface.
GPush the rail assemblies back into the cabinet.
CAUTION:Push both sides of the rail assemblies back at the same time.
8REPLACING THE FREEZER DOOR
Two people may be required to complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES
APull out the rail assemblies to the full length on each side of the cabinet.
8REPLACING THE FREEZER DOOR (cont.)
BHang the freezer door front onto open slots on the sides.
Slot
CTighten screws completely. (There are four 10 mm
REPLACE THE FREEZER BASKET
Replace the freezer basket by lowering it into the frame.
CAUTION:Make sure to pull out the side rails evenly.
30
