Under the Refrigerator

For most efficient operation, keep the area under the refrigerator clean. Remove the base grille and sweep away or vacuum up dust.

Clean the condenser coils at least twice a year.

For best results, use a brush specially designed for this purpose. It is available at most appliance parts stores.

Safety Instructions

Preparing for Vacation

For long vacations or absences, remove food and unplug the refrigerator. Move the control to the OFF position, and clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 l) of water. Leave the doors open.

If an icemaker is installed, move the icemaker feeler arm to the STOP (up) position and shut off the water supply to the refrigerator.

Operating Instructions

Preparing to Move

Secure all loose items such as grille,

Be sure the refrigerator stays in an upright

shelves and drawers by taping them

position during moving.

securely in place to prevent damage.

 

Installation

Replacing the Light Bulb

To replace a burned-out bulb, unplug the refrigerator from its electrical outlet.

In the refrigerator compartment, remove the lens cover by gently applying pressure to the side of the lens cover and pull the cover free from the control housing. Unscrew the bulb when cool and replace it with an appliance bulb of the same or lower wattage.

In the freezer compartment, simply unscrew and replace the bulb after ensuring the refrigerator is unplugged.

Turning the control to the OFF position does not remove power to the light circuit.

Instructions Troubleshooting Tips

Customer Service

11

Page 11
Image 11
GE TCD18, TDC18, TCX18, TCS18, TCC18 owner manual Safety Instructions, Installation