English
7.2Payment system installation on the base cabinet
The base cabinet has no payment system. The responsibility for possible damages to the machine and other objects and for personal injuries caused by an incorrect installation of the payment system falls on the person who installed the system.
-remove or turn the coiner supporting plate (fig.38, ref.1)
-hook and secure the coiner to the support (fig.38, ref.2)
-reassemble and lock the support to the cabinet door (fig.38, ref.3)
- connect the coiner to the CPU card
NOTE: Executive, MDB and BDV serial systems are connected to the CPU card using a cable and an interface in necessary, both included in the special kit.
-Then enter the programming menu so as to choose convenient settings.
See section 8 ‘PROGRAMMING AND MAINTENANCE MENU’ in order to check parameter setting, which should be in line with the system used.
fig.38, rif.1 | fig.38, rif.2 |
fig.38, rif.3
fig.38
25
