Saeco Coffee Makers SG200E instruction manual Espresso Coffee Brewing

English

”1”

”2”

fig. 5 ”3”

•the gear motor of the instant product activates the screw, dispensing the desired amount of product into the mixer.

•once the pre-set amount of water and product is dispensed, the mixer is disconnected.

ESPRESSO COFFEE BREWING

This process takes place only after the dispensing of cup, sugar and stirrer.

•the grinder (ref.1 fig.6) is activated until the quantity of coffee set on the dosing unit (ref.2 fig.6) is reached

•the activation of the dosing unit solenoid (ref. ‘3’ fig. 6) causes the door to open and, as a consequence, the coffee is dispensed into the cup.

•the unit rotation gear motor activates, thus moving the unit to the brewing position. The coffee tablet is pressed simultaneously.

•the pump brewing the set quantity of water activates, under the control of an appropriate electronic device (volumetric meter) (ref. ‘3’ fig. 5).

•the brew group gear motor is restarted, and goes back to the rest position. During this movement the coffee tablet is ejected.

The grinder and dosing unit activation sequence can take place in reverse order, according to the program selected (see programming menu).

”1” ”3”

”2

fig. 6

12