English
8.2.2Structure of the programming menu
Example of parameter setting To set the PRICE level 3 at 0.3 €:
-access the programming menu as indicated in 8.2.1, if the password is not requested, the entry ‘SYSTEM MANAGEMENT’ will appear;
-scroll the menu items with the UP key until ‘PRICE MANAGEMENT’ is displayed;
-press the ENTER key until the following message is displayed: ‘PRICE TABLE’
-scroll the menu items with the UP key until the following message is displayed: ‘PRICE 03’
-press the ENTER key (the cursor on the value to be modified will flash);
-increase or reduce the value with the UP and/ or DOWN keys until reaching 0.3 and press the ENTER key to confirm the value desired the cursor disappears.
8.2.3Functions of the programming menu
SYSTEM MANAGEMENT
The entries of the SYSTEM MANAGEMENT are:
-Vending Machine Code
It allows you to assign an identification code for the vending machine.
-Stops
It allows you to set the maximum amount of beverage or coffee. Once reached the maximum amount, the vending machine stops the brewing of relevant beverages.
The first digit on the left (‘00000’) refers to the quantity of the product dispensed from the last ‘RESET’ (partial counters reset).
The left hand digit, preceded by ‘LIM’, shows the maximum dispensable quantity (changeable value).
-Stop coffee
It allows to set the maximum number of coffee cups to be brewed before the stop.
-Stop beverage
It allows you to set the maximum number of individual beverages to be brewed before the stop.
-Stop grounds
It allows you to set the maximum number of coffee cups to be brewed, corresponding to maximum dump box capacity. Once reached the set quantity,
Important
This stop can be reset by removing the dump box for at least 5 sec.
Recommended solutions
It is advisable to set a max. of 100 coffees when using the dump box supplied with the machine
Important
Do not set any stop value if you are using the machine together with the supporting cabinet, which is equipped with its own dump box which is not controlled electronically
-Reset
It allows you to reset partial counters of stop functions.
-Minimum temperature
It allows you to set the temperature that the vending machine keeps for a few minutes after a beverage has been brewed. Set value is not expressed in centigrade.
34
