English
7 - PAYMENT SYSTEM
INSTALLATION
7.1Payment system installation on the machine
The vending machine has no payment system. The responsibility for possible damages to the machine and other objects and for personal injuries caused by an incorrect installation of the payment system falls on the person who installed the system.
-remove the cup dispenser
-from the internal side of the door, cut the external film following the punched shape which corresponds to the desired cashless payment or coin validation system (fig. 36)
fig.36
-cut away plastic door joints by means of an hacksaw (fig.37)
fig.37
-after finishing the whole perimeter, install and secure the payment system
-connect the payment system to the CPU card
-reassemble the cup dispenser
NOTE: a special interface card is required for connecting 12 Vcd coins validation systems to the CPU card.
-Then enter programming so as to choose convenient settings.
See section 8 ‘PROGRAMMING AND MAINTENANCE MENU’ in order to check parameter setting, which should be in line with the system used.
24
