English
•However, the Saeco International Group, whenever necessary and for valid reasons is entitled to update existing manuals and send to his customers all updating sheets that have to be kept with the original manual. Any technical problems that may arise can easily be solved by consulting this manual. For further information, contact the dealer where the machine was purchased, or one of the authorized service centres.
When calling, please, provide the following information:
-the data written on the data plate located on the rear side of the vending machine (fig. 1)
Data Plate
fig. 1
-The program version in the microprocessor (see adhesive label on the component mounted on the CPU card) (ref.’1’, fig. 2).
”1”
fig. 2
-The card code and version, to be found on the component side of the CPU card (ref.’2’, fig. 2).
Warning
It is absolutely forbidden to tamper with or modify the data plate.
The Saeco International Group declines all responsibility for injuries to people or damage to things resulting from:
-incorrect installation
-inappropriate electrical and/or water connection
-inadequate cleaning and maintenance
-unauthorized modification
-improper use of the vending machine
-
•The Saeco International Group will not be obliged in any case to indemnify any damage caused as a result of the forced inactivity of the machine due to failure.
•Installation and maintenance must be only carried out by qualified technicians.
•Use only specific foodstuffs suitable for vending machines.
•The automatic vending machine is not suitable for outside installation. The machine must be installed in dry places, with temperatures not below 1°C and it must not be installed in places where cleaning is made with water hoses (e.g. large kitchens, etc.).
•If at the time of installation, the usage conditions are different from those established or are subject to change over time, please contact the manufacturer immediately before using the machine. Furthermore, always act in compliance with national or local standards.
6
