English
1 - INTRODUCTION TO
THE MANUAL
1.1Foreword
Important
This publication is an integral part of the machine and should be read carefully in order to use it in a correct way. Complying with safety requirements is also essential
This manual contains the technical information necessary to carry out the procedures of use, cleaning, installation and maintenance of the vending machine mod. SG200E correctly. Always consult this publication before carrying out any operation.
Manufacturer: Saeco International Group
Via Panigali, 39 - 40041 Gaggio Montano (BO).
This manual should be kept with care and go with the machine throughout its operational life, also in case of changes of ownership.
If this manual should be lost or worn out, it is possible to require another copy to the Manufacturer or to an Authorized Service Centre. In this event, please indicate the data on the plate located on the back of the machine.
1.2Symbols used
Warning
This symbol indicates dangerous situations for the users, supply operators and maintenance technicians dealing with either the vending machine or the product to be dispensed.
Important
This symbol indicates operations that keep the machine in good working conditions, if properly carried out.
Recommended solutions
This symbol indicates the procedures that make the programming and/or maintenance operations quicker.
User
This symbol indicates the machine user, who is not authorized to clean or service the vending machine.
Supply operator
It is used to indicate operations to be exclusively carried out by personnel in charge of machine supplying and cleaning.
Maintenance is exclusive task of the maintenance technician, and cannot be performed by the supply operator.
Maintenance technician
A number of symbols are used in this manual to classify situations according to their degree of danger, and that require technicians with different skills.
The symbol is integrated with a message suggesting operating procedures or behaviours and providing useful information concerning the machine performance.
This symbol is used to indicate operations to be only performed by specialized maintenance personnel.
The maintenance technician is the only person authorized to keep the MAIN SWITCH ACTIVATION KEY, which allows disabling the safety system.
4
