English
9.4Cup releasing device cleaning and adjustment
Importante
Before removing the cup realesing device, make sure the cup bracket is in the brewing position - that is the fork that holds the cup is positioned under the brewing nozzles. If this is not the case, stop and then restart the machine to allow the automatic positioning of the cup bracket.
Remove the release ring locking screw. Remove the device by unhooking the elastic hook of the ring (fig. 60)
Check the satellite scrolls and, if need be, rinse the device so as to remove dirt.
fig.60
Important
Carefully blow all the inner parts with compressed air before assembling the ring, making sure that the cup bracket is in the brewing position - that is the fork that holds the cup is positioned under the brewing nozzles. If this is not the case, stop and then restart the machine to allow the automatic positioning of the cup bracket.
Reassemble the release ring making sure that the operating knob arrow is aligned with the reference notch on the cup dispenser housing (fig.61)
fig.61
In case of disassembly of all the internal parts of release ring assembly, refer to the specific assembling instructions (fig.62)
52