Saeco Coffee Makers SG200E instruction manual Payment Systems

					English
-	Cup key	PAYMENT SYSTEMS
It allows to enable or disable the key ‘beverage		The entries of the PAYMENT SYSTEMS are:
01’ (fig. 39) as:
		-	Parallel coiner
1 - ‘No cup’: By pressing the No-CUP key before		It allows you to enable the parameters of the
choosing a beverage allows to have it brewed		parallel coiner, of the mechanical coiner, the
without the cup.		cancelling machine and the choice of values to
After pushing the preselection key, the user has		assign to the single money channels.
8 seconds to select the desired product. After
this time the preselection is cancelled.		-	Enable
2 - ‘Beverage 05’: in this case, by pressing this		By setting ‘Y’, the control of the parallel coiner,
key the beverage 01 is brewed.		the mechanical coiner and the cancelling
3 - ‘Disabled’: in this case, by pressing this key		machine is enabled.
no beverage will be brewed.		By setting ‘N’, a parallel coiner possibly attached
		to the vending machine is disabled.
-	Reset validation
It allows to ‘RESET’ the data in the maintenance		-	Coin value
menu (STATISTICS).		It allows setting the value of the coins transferred
		to the vending machine from the parallel coiner,
-	Language	the mechanical coiner and the cancelling
It allows to select the language to be used by		machine.
the machine.		The following table shows the combinations
		channel/payment system.
-	Modify password
It allows to set a password or to modify the set
			Channel	Payment system
one. The password consists of a number
between 0001 and 65536. The 0000 value
(default value) means no password. To set the			1	Parallel coiner
password, press the UP and DOWN keys and			2	parallel coiner
confirm using the ENTER key.			3	Parallel coiner
-	Complete menu		4	Parallel coiner
			5	Parallel coiner
It allows to choose whether the entries of the			6	Parallel coiner/mechanical
programming menu should be shown entirely or				coiner
only partially. The least frequently used entries			7	Canceling machine/mechanical
are highlighted by a frame outlined at 8.2.2 and				coiner
can be shown only if in the data ‘Y’ is set in this
function.		-	Banknote Reader
		It enables the parameters of the parallel banknote
		validator and the choice of values to be assigned
		to individual note channels.
		-	Enable
		By setting “Y”, management of the parallel reader
		is enabled.
		By setting “N”, a parallel banknote reader
		possibly connected to the vending machine is
		disabled.
		-	Inhibition Level
		It allows setting the active level of the banknote
		reader’s inhibition level.

37