Saeco Coffee Makers SG200E Safety Standards, English, Cup Dispenser, Container Capacity, Foreword

Models: SG200E

1 68
Download 68 pages 48.17 Kb
Page 8
Image 8
CUP DISPENSER

English

Data plate showing the minimum and maximum water pressure

fig. 4

CUP DISPENSER

suitable for cups with 70-71 mm dia. and for cups with 73 mm dia. through an adequate release ring.

BOILER HEATING ELEMENTS armoured types:

from 1,000 Watt for coffee boiler

CONTAINER CAPACITY

Coffee beans

2.0

Kg

Instant coffee

0.6 Kg (instead of tea)

Granular milk

0.85 Kg

Chocolate

1.7

Kg (or 2.6)

Tea

2.0

Kg

Sugar

2.0

Kg

Cups

195

 

Stirrers

185

 

3- SAFETY STANDARDS

3.1Foreword

In compliance with the Machine Directive 98/37/ EEC, Low Tension Directive 73/23/EEC and CE Marking Directive 93/68/EEC, the Saeco International Group has drawn up a technical file on D.A. SG200 E vending machine at its plants, acknowledging during the design phase the regulations listed in the Declaration of Conformity inside any vending machine.

3.2General safety rules

Warning

-Before using the vending machine, read this manual carefully.

-Installation and maintenance must only be carried out by qualified technicians.

-For no reason whatsoever shall the operator reach those parts of the machine that are protected by guards requiring special instruments for removal.

-Good knowledge and absolute respect, from a technical point of view, of the safety standards and danger warnings contained in this manual, are imperative for installing, using, servicing and maintaining the machine in minimum minimum risk conditions.

Warning

Always disconnect the POWER CABLE before servicing or cleaning the machine.

Under no circumstances neither service the machine, nor remove safety guards before hot parts have cooled down!

8

Page 8
Image 8
Saeco Coffee Makers SG200E Safety Standards, English, Cup Dispenser, Container Capacity, Foreword, General safety rules