Saeco Coffee Makers SG200E Instant product, Example, Instant water, Coffee Water, Beverage check

English

-Instant product:

It defines the quantity of instant product to be dispensed.

Example:	BEVANDA	A
	SOLUBILE 3:	005

‘005’ indicates that 5 units of instant product 3 will be used.

The quantity of instant product can be adjusted from ‘0’ to ‘250’ with steps of 1.

-Instant water:

It defines the amount of water to be mixed with powder instant product.

BEVANDAA

Example: ACQUA SOL.3: 022

‘3’ indicates that water will be mixed with instant product 3. ‘022’ indicates that 22 units of water will be brewed with the instant product.

The amount of water can be adjusted from ‘0’ to ‘500’ with steps of 2.

Coffee beans C

Important

In case the sequence includes more instant products, the sequence ‘INSTANT - WATER’ will appear again.

If parameter programming concerning the instant product (‘INSTANT - WATER’) is such to extend powder brewing beyond water brewing, the vending machine stops powder dosing as to avoid an insufficient mixer rinsing and emits a beep. Check again the parameters set, in order to obtain a correct dispensing. Powder dispensing must end a few instants before the water dispensing so as to allow a good mixer rinsing.

-Coffee Water:

It defines the quantity of coffee to be brewed.

Example:	BEVANDA	01
	ACQUA CAFFE’:	38

‘38’ indicates that 38 water units will be brewed. The quantity of coffee can be adjusted from ‘0’ to ‘500’ with steps of 2.

-Sugar

It defines the quantity of sugar to be brewed with the beverage.

The following table shows the result of the different settings.

Setting	Sugar in the	Sugar in the
	beverage without	beverage with
	preselection	preselection
0	No sugar	Preselected quantity
1	1	Preselected quantity
2	2	Preselected quantity
3	3	Preselected quantity
4	4	Preselected quantity
NO	No Sugar	No Sugar

-Beverage check:

It allows you to perform brewing tests on the beverage just set.

By pressing ENTER the display shows ‘PRESS KEY’ and you can choose which key to press based on the type of brewing test:

-Key 2 Full beverage;

-Key 3 Beverage without cup, sugar and stirrer;

-Key 4 Only water;

-Key 5 Only powder.

TIMETABLE SETTING

The items of the TIMETABLE SETTING menu are:

-Never free

Products and beverages supplied should be paid.

-Always free

Products and beverages supplied are free.

Important

When the Time Keeper module is present, it is possible to set:

-washing times;

-witching on and off times;

-differentiated pricing times;

-free dispensing times.

39