GE ZSC 1001, ZSC 1000, SCB 1001, SCB 1000 manual

To replace the latch boards:

1.Place the oven in a partially removed position. (See Oven Removal / Partial Removal.)

2.Open the oven door.

3.Remove the single Phillips-head screw that holds the door switch access cover to the outer cover.

4.Disconnect the switch wiring.

Note: Each latch board is held in place with 2 Phillips-head screws. The screws are recessed from the top of the outer cover. Access holes are provided. A magnetic screwdriver is necessary to capture these screws.

5.Remove the 2 Phillips-head screws that attach the latch board to the oven chassis.

6. Remove the door switches from the latch board.

– 40 –