Oven racks
The racks may remain in the oven during the
sell'cleaning cycle without being damaged.
Periodically, after several seli_clean cycles, the
oven racks may need to be lubricated using
the Graphite Lubrication shipped with your
wall oven. To order additional Graphite
Lubrication, call ore" National Parts Center
800.626,2002 and retbrence WB02T10303.
1 Remove rack from the oven. See the Full (.x'tet_,sio*zo*uet_re(ks section.
2 Fully extend the rack on a table or
countertop. Newspaper may be placed
underneath the rack fin" easy clean up.
If there is debris in the slide tracks, wipe
it away using a paper towel. N07_: At U
,@'aphite lubricant wiped aw( O' must be _q)la_ed.
Shake the graphite lubricant before opening
it. Starting with left slide mechanism of the rack, place Ibur (4) small drops of lubricant
on the two (2) bottom tracks of the slide
close to the beating carriers.
Left side
5 Repeat fl_r the fight slide mechanism ot the rack,
_®®
Rightside
(;are and (;leaning
Wall Ov¢_
6 Open and close the rack several times to
distribute the lubricant.
7 Replace the cap on the lubricant and shake
it again. Turn the rack over and repeat steps
3, 4, 5 and 6.
®Let
Left side
®
Right side
8 Close the rack, turn rack
place in the oven. See the Full ex'tension ove_z IYI('/¢Asection.
9 Repeat above steps fl_r each rack.
N07_: Do not s/m O' with Pare a')or other lubricant
S/)_I)'S.
37
