GE Monogram ZET2, ZET1 manual are and leaning, Wall Ov, Bottome arm, FelYtOT IJ

(;are and (;leaning

Wall Ov_,_

([OOY_

FelYtOT} (IJ

The door is very heavy. Be cm'eful when removing and lifting the door.

Do not I!fi tke door b3' tke kandh,.

To remove the door:

1 Fully open the door.

2 Pull the hinge locks down towaId the door

fl'ame, to the unlocked position. A tool, such

as a small fiat-blade screwdvh'er, may be required.

3

Firmly

grasp

both

sides

of

the

door

at

the

lop.

4

Close

door

to

the

door

reI/lo\

al

position,

which

is most

of

the

way

and

lift

it

up

and

om

tmtil

the

hinge

a*m

is clear

of

the

slot.

Slot

d_b

Hinge lock

Pull hinge locks down to unlock

To replace the door:

1 Firmly grasp both sides of the door at the top.

2 With		the	door	at the		same	angle	as	the
remo\al		position,			seat	the	indentation			of the
hinge		arm	into	the	bottom		edge	of	the	hinge
slot.	The		notch	in	the	hinge	arm	must		be
fully	seated		into	the		bottom	of the		slot.

3 Fully open the door. If the doo_ will not hilly

open, the indentation is not seated correctly in

the bottom edge of the slot.

4 Push the hinge locks up against the front

fl'ame of the oven cavity, to the locked position.

5 (;lose the oven door.

Bottome arm

edgeof

Indentation

Hinge ..._/!

lock //I

Push hinge locks up to lock

_PYobg

The temperature probe may be cleaned with

soap and water or a soap-filled scouring pad.

Cool the teml)eramre probe beflwe cleaning.

Scour stubborn spots with a soap-filled scom'ing pad, rinse and dry.

Do not imme*se the tempemtu*v probe in ware*:

Do not sto*v the temp(,rature probe in the oven.

38