Turning Power ON/OFF
Turning the power OFF (Shutdown)
When turning the power of the equipment OFF, be sure to shut it down according to the procedure below. Check the following three points before shutdown.
•No jobs should be left in the print job list.
•None of the PRINT DATA lamp (blue) or the MEMORY RX / LINE lamp (green) should be blinking.
(If the equipment is shut down while any of the above lamps is blinking, jobs in progress such as FAX reception will be aborted.)
•No computer should access the equipment via the network, such as TopAccess.
1
If a job in process exists when the [POWER] button of the control panel is pressed, “Processing job will be deleted. Are you sure you want to shutdown?” appears.
“Shutdown is in progress.” appears for a while, and then the power is turned OFF.
Press the [POWER] button until a “pip” sound is heard.
When the equipment is not used for a long period of time:
When the power is turned OFF with the main power switch, the
MAIN POWER lamp (green) will go out.
Press the [POWER] button on the control panel to shut down the equipment, check that the [ENERGY SAVER] button (green) stops blinking and is definitely not lit, and then turn the power OFF with the main power switch.
13
