Description of Each Component
15. Front cover | 17. Alarm lamp |
Open this cover when you replace the toner cartridge and clean the charger.
This orange lamp lights when a paper misfeed has occurred in the Reversing Automatic Document Feeder.
16. Main power switch | 18. Document lamp |
Use this switch to turn the power of the equipment ON or OFF.
&P.12 “Turning Power ON/OFF” in this manual
This blue lamp lights when the originals are placed on the original feeder tray. It also blinks while the originals are being scanned.
Left / Inner side | 1 |
|
12 | 1 |
|
|
|
|
| 5 |
|
|
| |
| 2 |
|
|
| |
|
|
|
|
| |
| 3 |
|
|
|
|
11 |
|
|
|
|
|
10 | 4 | Yellow | Magenta | Cyan | Black |
|
|
|
|
| |
9 |
| 6 |
|
|
|
|
| 7 |
|
|
|
|
| 8 |
|
|
|
1.Platen sheet
Use this to hold the original on the original glass to scan it.
&P.42 “Regular Cleaning” in this manual
2.Original glass
Use this to copy
3.Touch panel
Use this to set and operate various types of functions such as copying, scanning and faxing. This also displays messages, such as when paper runs out or paper misfeeds occur.
&P.10 “Touch panel” in this manual
4.Control panel
Use this to set and operate various types of functions such as copying and faxing.
&P.8 “Control panel” in this manual
5.Toner cartridge
When toner runs out, the message appears on the touch panel. Replace the cartridge following the procedure below.
&P.36 “Replacing Toner Cartridge” in this manual
6.Waste toner box
When “Dispose of used toner” appears on the touch panel, replace the waste toner box according to the following procedures.
&P.37 "Replacing Waste Toner Box" in this manual
7.Main charger cleaners
If unevenness occurs on the copied or printed paper, clean the main chargers according to the following procedures.
&P.43 "Cleaning the main chargers and LED print heads" in this manual
8.LED print head cleaner
If unevenness occurs on the copied or printed paper, clean the LED print head according to the following procedures.
&P.43 "Cleaning the main chargers and LED print heads" in this manual
9.Exit tray
Printed paper exits into this tray.
10.Paper exit stopper
Use this to prevent the exiting paper from falling. Open this when you make many copies or prints on a larger size of paper such as A3, B4, LD and LG.
11.Scanning area
The data of originals transported from the Reversing Automatic Document Feeder are scanned here.
&P.42 “Regular Cleaning” in this manual
12.Original scale
Use this to check the size of an original placed on the original glass.
