Density adjustment
You can manually adjust the density by pressing either 
or 
.
To lighten the density, press 
, to darken it, press
.
Press [AUTO] to adjust the density automatically.
The automatic density adjustment is set by default.
Basic Copying Operation
Bypass copying
11 Move the paper holding lever toward the outside and then 2 place paper face down on the bypass tray.
1 |
2 |
2 | Align the side guides to the paper | 2 |
length and then move the paper |
holding lever toward the equipment.
31 Press the button corresponding to the size of paper set on the bypass tray and then 2 [OK].
1 |
2 |
Press [PAPER TYPE] if the type of the paper you placed on the bypass tray is other than plain paper.
4Press the [START] button. Bypass copying starts.
23
