Toshiba 2051c Work Table KK-4550, FAX Unit GD-1320, 2nd Line for FAX Unit GD-1260, Desk MH-2050

Options

Other options available are as follows. Contact your service technician or representative for details.

Work Table (KK-4550)

This is a small table for placing originals while the equipment is being operated.

Installed on the right-hand side of the equipment.

FAX Unit (GD-1320)

This is a unit for using the equipment as a Fax machine. Installed in the rear side of the equipment.

2nd Line for FAX Unit (GD-1260)

This unit enables you to add a line to the Fax, making a 2nd line available.

•Installed inside of the equipment.

•The FAX Unit is required.

Desk (MH-2050)

This is a desk for the equipment.

Accessible Arm (KK-2550)

This enables a user in a wheelchair to close the Reversing Automatic Document Feeder while emaining seated.

&P.66 “How to use the Accessible Arm” in this manual

Operator’s Manual Pocket (KK-1660)

Keep the manual in this pocket.

Wireless LAN Module (GN-1060)

This module enables the equipment to be used in a wireless LAN environment.

•Installed inside of the equipment.

•The Antenna is required.

•The equipment cannot be connected to the wireless and wired LAN at the same time.

Antenna (GN-3010)

This is used when the Wireless LAN Module is installed.

e-BRIDGE ID Gate (KP-2004/KP-2005)

You can log in and use the equipment simply by holding the IC card over the e-BRIDGE ID Gate.

•Installed on the right-hand side of the equipment.

•This cannot be installed with the Work Table at the same time.

Data Overwrite Enabler (GP-1070)

This is an enabler to erase the data stored temporarily when copying, printing, scanning, faxing, Internet Fax or network Fax is performed. It overwrites temporarily stored data with random data.

IPsec Enabler (GP-1080)

This enables the IPsec function in this equipment.

Hardcopy Security Kit (GP-1190)

This enables Hardcopy Security Printing and you can track the security pattern information.

Meta Scan Enabler (GS-1010)

This enables the Meta Scan function in this equipment.

External Interface Enabler (GS-1020)

This enables the EWB function in this equipment.

Unicode Font Enabler (GS-1007)

This enables printing from the SAP environment using Unicode font with this equipment.

Front USB Cable (GR-1140)

This enables to connect a USB media in this equipment.

Hard Disk Kit (GE-1220)

This enables to store the data,etc.

Depending on the model, options have been already installed and the functions can be used.

The following options are exclusive for e-STUDIO2050C/2550C:
- Wireless LAN Module (GN-1060)
- Antenna (GN-3010)
- Data Overwrite Enabler (GP-1070)
- IPsec Enabler (GP-1080)
- Hardcopy Security Kit (GP-1190)
- Meta Scan Enabler (GS-1010)
- External Interface Enabler (GS-1020)	6
- Unicode Font Enabler (GS-1007)
- Front USB Cable (GR-1140)

- Hard Disk Kit (GE-1220)

65