GE Monogram ZXR859, ZXR858 Required Accessories, Product Dimensions, Installation Preparation

Installation Preparation

REQUIRED ACCESSORIES

This book provides step by step instructions to install the Monogram ZV850 ceiling mounted hood for recirculating operation.

•One of the following accessory kits is required for non- vented ceiling mounted installations of model ZV850.

Choose the correct kit according to ceiling heights: ZXR858 – For 8 ft. ceiling height.

ZXR859 – For 9 ft. ceiling height ZXR8510 – For 10 ft. ceiling height.

•Order the required accessory at the same time as the vent hood and have on site before installation.

•Each kit includes decorative duct covers, a support frame, air deflector and charcoal filters.

PRODUCT DIMENSIONS

The vent hood must be installed 24″ min. and 30″ max. above the cooking surface. 25-1/2″ is recommended for best performance and to ensure that the duct cover meets the ceiling. The cooking surface should be at least 36″ above the floor. Installation will be easier if the vent hood is installed before the cooktop and countertop is installed.

*25-1/2" Recommended

*Height to Ceiling

8-1/4"

35-3/8"

27-1/2"

* 26-1/4” for 8 ft. Ceiling Using ZXR858 Accessory

38-1/8” for 9 ft. Ceiling Using ZXR859 Accessory

50-1/8” for 10 ft. Ceiling Using ZXR8510 Accessory

*The distance between the cooking surface and the bottom of the hood must be at least 24” and up to 30”. The 25-1/2” recommended installation height, above the standard 36” countertop, will ensure duct cover fit to the ceiling.

36" Reference

3