IP camera
4.From the menu, choose Show Advanced settings then choose Port Forwarding / Virtual Server
5.Enter the IP addresses and ports given in the table below clicking 'Add this setting' until you have all entries looking like the following.
ID | Public Port | Private Port | Port Type Host IP Address | |
1 | 210 | 80 | TCP | 192.168.1.100 |
2 | 220 | 80 | TCP | 192.168.1.200 |
3 | 230 | 80 | TCP | 192.168.1.300 |
6. Select 'Save setting and Reboot' button
Viewing the Cameras from the Internet
Now that suitable routes are in place to forward requests from a specific public port to a specific camera, you can access each camera's web interface from any computer on the Internet.
To view each camera;
1.Type the location (IP and Port) given in the table below into the location bar of a web browser then press enter. If you own a domain name that points to your public IP address you can use that as well (e.g. mycam.2sip.net:210)
2.The Web page of the camera should appear immediately or after entering a logon. You can use all the camera functions as normal but be aware that changes to the Networking
