Generac Portable Products Power Transfer System
NOTE: The maximum load allowed through each
Load Manager™ switch is 7200 Watts: 30 Amps at 240 Volts or 60 Amps at 120 Volts.
Per National Electric Code, connection of a generator to any electrical circuit normally powered by an electric utility must be by means of approved transfer switch equipment so as to isolate the electrical circuit from the utility distribution system when the generator is operating. Failure to isolate the electrical circuits by such means may result in injury or death to utility power workers due to backfeed of electrical energy.
CAUTION: Each Load Manager™ switch is for indoor use only. The connection box is a NEMA type 3R, intended for outdoor use.
NEMA stands for National Electrical Manufacturer’s Association.
UNPACKING
Remove the Power Transfer System components from the shipping carton. Each Load Manager™ switch is completely prewired and ready for installation. Inspect the switches and attached wires and flexible conduit for any shipping damage.
The connection box is supplied ready to be wired. Inspect the box, the connection cord set, and the connecting plug for any damage.
The installer will select and attach the connecting cord plug, as described in the Installation Procedure, step 22.
Items Not Shipped with Power Transfer System:
The following items, required for system installation, are not included and must be provided by the installer:
1. Tools required for installation
GENERATOR
COMPATIBILITY
Only use a generator that is
NEVER use a generator equipped with a
CARTON CONTENTS
Items in the shipping carton include:
•Two Load Manager™ Switches
•Connecting Box
•Connecting Cord Set
•50 Amp Connecting Plug
•“Attention” Decal
If any of the above parts are missing or damaged, call the Generac helpline at
2.Anchors and screws to mount the power transfer system components and conduit.
3.Junction box(s), conduit, fittings, wire nuts, and insulated copper wire for connecting the Load Manager™ switches to the outside connection box.
SPECIFICATIONS |
|
Model Number | 1403 |
Maximum Circuits | 12 |
Maximum Load/Circuit from Generator | 15 Amps |
Maximum Load/Circuit from Load Center | 20 Amps |
Maximum Watts per Load Manager™ | 7200 |
Connecting Cord Length | 8 ft. |
2
