English
10" Table Saw, 15 AMP
Operator’s Manual
Specifications:
• | Model # | GTS10S |
• | Description: | 10" Table Saw |
• | Input: | 120V ~ AC, 60Hz, 15.0 Amp |
• | Blade Size: | 10" (254 mm) |
• | Blade Bevel: | |
• | 4,800 RPM | |
• | Arbor Size: | 5/8" (16 mm) |
• | Table Size: | 26" L x 16" W |
•Cutting Capacity at 90 degrees: 3"
•Cutting Capacity at 45 degrees:
•Includes: Table Saw, 60T Carbide Blade, Miter Gauge, Rip Fence,
Warning:
To reduce the risk of injury, user must read and understand this operator’s manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665.
wear your |
| |
Safety glasses | Warning: | |
| The Operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye | |
foresight is better | damage. Before beginning tool operation, always wear safety goggles or safety glasses with side shields and a full face shield | |
when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. | ||
Than no sight | ||
Always wear eye protection which is marked to comply with ANSI Z87.1. | ||
|
Look for this symbol to point out important safety precautions.
It means attention!!! Your safety is involved.
GENERAL SAFETY RULES
Warning:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
10" Table Saw |
|
Operator’s Manual | GTS10S |
