INSTALL DOOR ARMS: Sectional doors

OPEN YELLOW PARTS BAG

1.Attach the arms.

Fasten curved door arm to door bracket using clevis pin (24) and cotter pin (25) (Fig. 2-10).

14 Straight arm to carriage using clevis pin (24) and cotter pin (25) (Fig. 2-10).

[24] [25]

2.Connecting the arms.

Slide carriage back and forth to adjust arm length.

Overlap arms as much as possible.

Make overall length as short as possible.

Fasten arms together using 2 bolts (27) and nuts (28) (Fig. 2-10). (Place the bolts as far apart as possible.)

[27][28]

3/8"-16 x 7/8"

3/8"-16

 

clevis & cotter pins

short as possible

clevis &

cotter

pins

FIG. 2-10 Attaching door arms (sectional doors).

NOTE: Whenever possible, it is recommended that the door arms assembly be angled away from the door to prevent putting downward force on the door and door bracket. (Fig. 2-11).

Additionally, where possible, the straight door arm may be eliminated.

INSTALL DOOR ARMS: 1-piece doors

OPEN YELLOW PARTS BAG

1.Attach the arms.

Straight arm to door bracket using clevis pin (24) and cotter pin (25) (Fig. 2-12).

Curved arm to carriage using clevis pin (24) and cotter pin (25) (Fig. 2-12).

[24] [25]

2.Connecting the arms.

Slide carriage back and forth to adjust arm length.

Overlap arms as little as possible.

Make overall length as long as possible.

Fasten arms together using 2 bolts (27) and nuts (28) (Fig. 2-12).

[27][28]

3/8"-16 x 7/8"

3/8"-16

angle

door arms

door

FIG. 2-11 Door arms at angle to door.

clevis &

cotter

pins

long as possible

FIG. 2-12 Attaching door arms (1-piece doors).

REMINDER: If you have no access to your garage from the outside other than your garage door, please consider a GER-2 emergency release kit shown on page B in center of manual.

Call Customer Service at 1.800.354.3643, or visit www.geniecompany.com.

Page 14
Image 14
Genie 3452535556 GCG, 3452535556 PCG manual Open Yellow Parts BAG, Attach the arms, Connecting the arms