Allows BIOS to automatically detect IDE/SATA devices during POST. (Default value)
Select this if no IDE/SATA devices are used and the system will skip the automatic detection step and allow for faster system start up.
User can manually input the correct settings.
Use this to set the access mode for the hard drive. The four options are: CHS/LBA/Large/Auto(default:Auto)

English

2-1

Standard CMOS Features

 

 

 

 

 

 

 

 

 

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software

 

 

 

 

 

Standard CMOS Features

 

 

 

Date (mm:dd:yy)

 

Fri, Jun 23 2006

Item Help

 

Time (hh:mm:ss)

 

22:31:24

 

Menu Level`

` IDE Channel 0 Master

 

[None]

 

Change the day, month,

` IDE Channel 0 Slave

 

[None]

 

year

 

` IDE Channel 1 Master

 

[None]

 

 

 

` IDE Channel 1 Slave

 

[None]

 

<Week>

 

` IDE Channel 2 Master

 

[None]

 

Sun. to Sat.

` IDE Channel 3 Master

 

[None]

 

 

 

` IDE Channel 4 Master

 

[None]

 

<Month>

` IDE Channel 5 Master

 

[None]

 

Jan. to Dec.

 

Drive A

 

 

[1.44M, 3.5"]

<Day>

 

 

Floppy 3 Mode Support

 

[Disabled]

 

1 to 31 (or maximum

 

Halt On

 

 

[All, But Keyboard]

allowed in the month)

 

 

 

<Year>

 

 

 

 

 

 

 

 

 

Base Memory

 

 

640K

 

1999 to 2098

 

Extended Memory

 

511M

 

 

 

 

Total Memory

 

 

512M

 

 

 

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

 

F5: Previous Values

 

F6: Fail-Safe Defaults

 

F7: Optimized Defaults

 

 

 

 

 

 

 

 

 

Date

 

 

 

 

 

 

 

The date format is <week>, <month>, <day>, <year>.

 

 

 

 

Week

 

The week, from Sun to Sat, determined by the BIOS and is display only

 

Month

 

The month, Jan. Through Dec.

 

 

 

Day

 

The day, from 1 to 31 (or the maximum allowed in the month)

 

Year

 

The year, from 1999 through 2098

 

 

Time

The times format in <hour> <minute> <second>. The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.

IDE Channel 0 Master/Slave; IDE Channel 1 Master/Slave devices setup. You can use one of three methods:

Auto

None

Manual

Access Mode

IDE Channel 2/3/4/5 Master

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive You can use one of the two methods:

Auto

Allows BIOS to automatically detect IDE/SATA devices during POST(default)

None

Select this if no IDE/SATA devices are used and the system will skip the

 

automatic detection step and allow for faster system start up.

 

 

GA-K8N51PVM9-RH-NV Motherboard

- 32 -

Page 32
Image 32
Gigabyte GA-K8N51PVM9-RH user manual Standard Cmos Features, Time, IDE Channel 0 Master/Slave IDE Channel 1 Master/Slave