Gigabyte GN-WP01GT manual Configure Pre Shared Key WEP Security, WEP key configuration

Super G Wireless PCI Adapter

Cells check box if the access point to which the client adapter is to associate (or the VLAN to which the client will be assigned) has WEP set to Optional and static WEP is enabled on the client adapter. Otherwise, the client is unable to establish a connection with the access point.

Uncheck the Allow Association to Mixed Cells check box if the access point to which the client adapter is to associate (or the VLAN to which the client will be assigned) does not have WEP set to Optional. This is the default setting.

None – no security is set. (Default setting)

Select the type of security encryption (WPA/WPA2, WPA/WPA2-Passphrase, WEP or RADIUS 802.1X) from the radio buttons, and click Configure. Depending on the security selected, the following Configure Security Screens will appear.

Configure Pre Shared Key (WEP) Security

To use WEP, select if you want Hex or ASCII method, enter a pre-shared key, select 64-bits, 128-bits, or 152-bits from the drop down box and click OK.

Note: ASCII text WEP keys are not supported on GIGABYTE Routers, you must choose the Hexadecimal (0-9,A-F) option if you are connecting with these Access Points.

Figure 20. WEP key configuration

WPA/WPA2-Passphrase - When you select WPA/WPA2, the target

802.11device must also be WPA/WPA2 enabled in order to communicate with each other. Obtain the WPA/WPA2 Passphrase for the access point from your system administrator and inter it in the WPA/WPA2 Passphrase field.

•WPA/WPA2 Passphrase must contain 8 to 63 ASCII text characters or 64 hexadecimal characters.

•Your client adapter's WPA/WPA2 Passphrase must match

25