46.Wrap the Long Cable (62) under a 90mm Pulley
(38).Attach the Pulley and a Cable Trap (37) to the Press Frame (14) with an M10 x 119mm Bolt
(76)and an M10 Nylon Locknut (75). Make sure that the Cable Trap is turned to hold the Cable in place. Do not tighten the Locknut yet.
47.Wrap the Long Cable (62) under a 90mm Pulley (38). Attach the Pulley and a Cable Trap (37) to the Right Seat Frame (3) with an M10 x 119mm Bolt (76) and an M10 Nylon Locknut (75). Make sure that the Cable Trap is turned to hold the Cable in place. Do not tighten the Locknut yet.
48.Wrap the Long Cable (62) over a 90mm Pulley (38). Attach the Pulley and a Cable Trap (37) to the Leg Press Arm (12) with an M10 x 123mm Bolt (98), an M10 Large Washer (94), and an M10 Nylon Locknut (75). Make sure that the
Cable Trap is turned to hold the Cable in place. Do not tighten the Locknut yet.
49.Wrap the Long Cable (62) around a 90mm Pulley (38). Attach the Pulley to the Right Upright (5) with an M10 x 45mm Bolt (78) and an M10 Nylon Locknut (75). Make sure that the Cable Trap is turned to hold the Cable in place.
50.Remove the M10 Nylon Locknut (75) used in step 48.
Wrap the Long Cable (62) under a 90mm Pulley (38). Attach the Pulley and a Cable Trap (37) to the Leg Press Arm (12) with the M10 x 123mm Bolt (98) used in step 48, an M10 Large Washer (94), and the M10 Nylon Locknut (75). Make sure that the Cable Trap is turned to hold the Cable in place.
46 |
|
|
75 |
|
|
14 |
| 62 |
|
| |
| 38 | 76 |
| 37 | |
|
| |
47 | 38 |
|
|
| |
| 62 | 37 |
75 | 3 | |
|
| 76 |
|
| 75 |
|
| 78 |
48 |
|
|
75 | 38 62 | |
|
| |
12 |
|
|
| 94 | 98 |
| 37 |
|
49 |
|
|
|
| 78 |
| 62 | 5 |
|
| |
|
| 75 |
|
| 38 |
50 |
|
|
75 |
|
|
37 |
|
|
38 | 62 | 98 |
| 94 |
|
| 12 |
|
19
